[操作疑難] synology harddisk degraded, help

Rank: 3 Rank: 3 Rank: 3

2^#

發表於 2015-9-28 17:31 | 只看該作者

回覆 1# x28

If you are using SHR/Raid-1/5/6/10/01, just identify the failed harddisk(may show red LED on the Harddisk LED) and replace it with a same size or larger one. If your model support online hot swap, you are better to do that online. After you replace the harddisk, login DSM, go to volume/raid gp setting and "rebuild" the degraded volume/raid gp.

x28

Rank: 2 Rank: 2

3^#

發表於 2015-9-28 21:35 | 只看該作者

My unit is 712+, i think hot swap is ok

Gen

Rank: 2 Rank: 2

4^#

發表於 2015-9-28 21:45 | 只看該作者

Using SHR / raid ? if yes, pull the old one out and swap new .. then it will work..

tingcrab

Rank: 3 Rank: 3 Rank: 3

5^#

發表於 2015-9-28 22:32 | 只看該作者

你最好了解自己個setup先……雖然degrade個狀態+2bay都幾明顯係行RAID1，但始終setup嗰個係你嚟，應該suppose知道degrade就應該check一check個disk mamager，了解係邊隻碟死，再搵隻新碟rebuild返就得……

via HKEPC Reader for Android

普羅

特級會員

Rank: 4 Rank: 4 Rank: 4 Rank: 4

6^#

發表於 2015-9-28 22:50 | 只看該作者

出得degrade姐係有HDD有事

wunit

Rank: 3 Rank: 3 Rank: 3

7^#

發表於 2015-9-28 23:32 | 只看該作者

本帖最後由 wunit 於 2015-9-28 23:36 編輯

如果仲access到D file, 想安全D咪用你用到的方法backup一次先lol
不過最好就唔好reboot

712+冇HDD燈睇, 入DSM睇下死Disk 1定2

x28

Rank: 2 Rank: 2

8^#

發表於 2015-9-30 17:18 | 只看該作者

purchased 2 x 4 tb harddisk for repairing.
i repaired them one by one.
but, why the total space is 2 TB?
will it auto recognized after full repairing?

hkstanley

Rank: 3 Rank: 3 Rank: 3

9^#

發表於 2015-9-30 17:50 | 只看該作者

回覆 8# x28

You need to press "Repair" in DSM, it will auto recognize the new HDD.

x28

Rank: 2 Rank: 2

10^#

發表於 2015-9-30 19:08 | 只看該作者

回覆 x28

You need to press "Repair" in DSM, it will auto recognize the new HDD.
hkstanley 發表於 2015-9-30 17:50

tHANKS BROTHER!

finished one HD, now repairing the second one and checking the file consistency.
though it is showing 2 TB available, hope it would auto detect after repairing the second one