[隨身碟] 我隻16G手指量產失敗

superman88

我隻新買 ( JetFlash 620 )16G手指 , 做了量產失敗 ,
因 JetFlash 620 有資料加密 ,
唔好用 , 剷走 , 做了多次量產 , 之後不能做格式化 ,
16G 手指內裡 0kb .
用官方"OnLineRecovery_620.exe"亦不能成功 .

請問應該用什麼程式量產software最好 .
希望各位師兄教路 , 謝謝 .

cykwok

什麼是 "量化" ?

試 Delete partition->Create partition->Format

superman88

已解決 ,
用原廠 " OnLineRecovery_620.exe " , 不能成功 .
改用"OnLineRecovery.exe "後 , 可以用format .

kcthomlau

回復 1# superman88
http://www.upan.cc/tools/boot/2011/upantool_mini_v1.3.html
琴日買左SSD剛用呢個裝完WIN7
都幾易用, 就咁量產做USB-HDD完解壓WIN7 ISO入去, 佢自己識DETECT CHIP
之後用手指開機

KratosHK

我玩死左支STARRAM 32GB......
用完量化程式之後手指都仲用到
但係改唔到CD-ROM
R/W 速度大減
屁股支燈亦到整唔著

kcthomlau

我玩死左支STARRAM 32GB......
用完量化程式之後手指都仲用到
但係改唔到CD-ROM
R/W 速度大減
屁股支燈亦到 ...
KratosHK 發表於 2012-5-1 18:34

starram chip好似無量產工具支援喎

KratosHK

starram chip好似無量產工具支援喎
kcthomlau 發表於 2012-5-1 19:28

    我查支手指既CLIP
係INNOSTAR 902
咪拎去玩囉.....

madebyp90

我查支手指既CLIP
係INNOSTAR 902
咪拎去玩囉.....
KratosHK 發表於 2012-5-1 20:07

    click小左ddr
同
INNOSTAR 902要xp下做

你係xp,量產工具按f6,可以ers all再玩過

innostar 912(adata 102p,)成功

kcthomlau

回復 7# KratosHK
我以為佢用自家CHIP添

anon893

已解決 ,
用原廠 " OnLineRecovery_620.exe " , 不能成功 .
改用"OnLineRecovery.exe "後 , 可以用format . ...
superman88 發表於 2012-5-1 02:37 PM

I think I know why
http://www.transcend-info.com/Products/online_recovery_2.asp?dw=1
You have manually deleted the seperate partition that comes with the 620
So the online recovery tool specfic to the JF620 cannot recognise your drive
Therefore you need to use the standard version tool
http://agnipulse.com/2011/08/rem ... jetflash-usb-drive/

BTW, have you done speed test on your reformatted JF620?
If not, can you do one and post the results?
My understanding is that you need to use the recovery software to reprogram the Alcor chip inside in order to restore higher write speeds
http://www.hkepc.com/forum/viewt ... ght=transcend%20600

Also, what's the speed performance of all current JF600/620 drives (16-64GB)?
Wanted to buy one but fear that write speeds will be very low (<16MB/s)