[Guide] How to flash your Nvidia Card Bios

Mr.Pie

Sor,因為我中文比較差,翻譯不可能....但有問題請問我, 我會試下幫你

Please note that I, Mr.Pie or Overclock.net is not responsible for any damage you may sustain to your computer or graphics card while doing this bios flash

1. Download
HP USB Creator : http://files.extremeoverclocking.com/file.php?f=197
Win98 Files so its bootable: http://files.extremeoverclocking.com/file.php?f=196
NvFlash: http://www.techpowerup.com/downloads...h_5.95.01.html

2. Install the HP USB creator and run it.

3. Select your USB Device. Select Quick Format and select Create DOS startup disk. Select the Unrared Win98 files for the DOS System files drop box at the end of the program. Click start

4. Open up your USB Device in my computer and copy and paste the unrared NvFlash files onto your USB. Don't worry if its empty as the Win98 files are hidden and can't be seen.

5. Paste the updated bios that you wish to use to update your card. (rename that bios to 1.rom first)

6. Reboot and boot from your newly created USB NVflash device.

7. The Windows98 logo should appear then a command prompt pops up.

8. Type "Nvflash" (without the quotes), then keep clicking enter till the next empty command line appears so you can type again.

9. Type the following commands to flash/update your Nvidia GPU bios

nvflash -b backup.rom
nvflash --protectoff
nvflash --eraseeeprom
nvflash -4 -5 -6 1.rom

the -b backup.rom command is to backup the original bios on your USB in case you need it.
keep clicking y when prompted. Do NOT power off till it says firmware update is complete.

10. When completed, hold your power button to reboot.
Ta Da! All done!

If you have any questions, please post back here or PM me directly

Mr.Pie Signing out