但我搵唔到邊度OFF SVP.. 想請教邊度關?
blueseacow 發表於 2012-3-16 01:20

如果粒U唔勁,建議唔好裝SVP

TOP

但我搵唔到邊度OFF SVP.. 想請教邊度關?
blueseacow 發表於 2012-3-16 01:20


tray icon -> svp manager -> right click -> exit
總之唔開住個 svp manager 就唔會有任何插幀既較果

TOP

tray icon -> svp manager -> right click -> exit
總之唔開住個 svp manager 就唔會有任何插幀既較果 ...
keis 發表於 2012-3-16 01:30


原來要開住, 明白

TOP

本帖最後由 totalz 於 2012-3-16 20:28 編輯
想問mkv戲點樣播到入面既字幕?? 佢應該有字幕, 已用klite codec standard..唔該各位ching ...
blueseacow 發表於 2012-3-15 20:55


make sure u use a compatible splitter!

update:  Just tested splayer with 720p h.264 + dts, no good, sound output not smooth, unnecessary stereo signal output when pause, and video stutter  :(   BUT, playing mpg is ok, but the AR is incorrect!!

TOP

本帖最後由 totalz 於 2012-3-16 20:27 編輯
mpchc + lav + madvr + svp = unbeatable
無得解,明既自然會明, 唔明既講黎都浪費時間. ...
keis 發表於 2012-3-15 21:25


few screen caps for comparison will be appreciated!

also, madVR does not support full color-range, correct me if i'm wrong.

TOP

few screen caps for comparison will be appreciated!

also, madVR does not support full color-range ...
totalz 發表於 2012-3-16 20:04


using madVR renderer is not possible to do screen cap.
the best way to compare is to try it by yourself, if your cpu is fast enough to do so.
by the way, it do support full color-range output for a long time.
the option is over here:
附件: 您需要登錄才可以下載或查看附件。沒有帳號?註冊

TOP

using madVR renderer is not possible to do screen cap.
the best way to compare is to try it by you ...
keis 發表於 2012-3-16 23:33


Interesting,

But how do u open madVR setting?

TOP

Interesting,

But how do u open madVR setting?
totalz 發表於 2012-3-17 01:13


install and set madVR as the prefered renderer in mpc-hc
mpc-hc -> view -> options -> playback -> Directshow Video -> madVR

after that play a video first and don't close it, the madVR renderer should be show up inside the filters list
mpc-hc -> play -> filters -> madVR renderer -> edit settings

TOP

本帖最後由 totalz 於 2012-3-18 16:49 編輯
install and set madVR as the prefered renderer in mpc-hc
mpc-hc -> view -> options -> playback ->  ...
keis 發表於 2012-3-17 20:29


thanks,

I have to disable "exclusive" mode, cause the screen flicker when the modes are switching, and that's just for the seeking bar to show in full screen!  I can capture screen in madVR with KMP, have u tried the capture function with mpc-hc?

The color range I want is YUY2 or RGB32, but madVR is force it to YV12!!

What h264 decoder do u use?

TOP

install and set madVR as the prefered renderer in mpc-hc
mpc-hc -> view -> options -> playback ->  ...
keis 發表於 2012-3-17 20:29


想請教一下, 如果用咗個SVP pack, 仲可以用硬解嘛? Thanks

TOP