ktktkt

原帖由 dino_lo 於 2007-6-29 23:33 發表
I will try with J1 and PS change to other position again with LCD_INFO again.


1.  I can try the PS tie high or tie low to see the parallel ,serial mode
2  .for J1 (MI) only affect in the para ...

I think we made a big mistake at the very begining. My new finding is:
pin3 is for controlling 6800 (when High), 8080 (when GND),
J1 is for parallel (when high), and serial (when GND)

So I made pin3 GND, J1 high, I can drive it in 8080 parallel mode.
And you made pin 3 GND, J1 low, and can drive it in serial mode.

I just tried:
pin 3 HIGH, and J1 high, and my 6800 parallel mode driver works!

I guess: if you make pin3 HIGH, and J1 low, you can drive it in serial mode (because pin3 actually don't bother)

dino_lo

我會話, 才35元, 咁睇就會唔介意了.

3K

係喎  , 有無人整左個 demo 板呀 ?
我想知用咩software 轉一段 動畫GIF , 做 HEX

5dollar

多謝dino_lo兄同 ktktkt 兄既資料,
我都成功用lcdhype推到.

另外個controller 好似唔係KS0713, 而係台灣NT7502/NT7532, 不過功能差不多.
網上搜過, 以上芯片同sed1565 唔係100%相容, 有少數command 有分別.

winglim7

原帖由 3K 於 2007-6-30 17:53 發表
係喎  , 有無人整左個 demo 板呀 ?
我想知用咩software 轉一段 動畫GIF , 做 HEX

demo 板????/

KSC

原帖由 3K 於 2007-6-30 17:53 發表
係喎  , 有無人整左個 demo 板呀 ?
我想知用咩software 轉一段 動畫GIF , 做 HEX

都無原裝個C/asm檔，有先知它係點入
要做個圖==>hex出來唔難,我可以寫個program出來

ktktkt

原帖由 5dollar 於 2007-7-1 20:54 發表
多謝dino_lo兄同 ktktkt 兄既資料,
我都成功用lcdhype推到.

另外個controller 好似唔係KS0713, 而係台灣NT7502/NT7532, 不過功能差不多.
網上搜過, 以上芯片同sed1565 唔係100%相容, 有少數command 有分別.

Which commands, can you identify?

5dollar

haven't studied the datasheets but found some info here

http://www.crystalfontz.com/forum/showthread.php?t=4808

MCLL

今日都買了一個來玩玩, 不過其他沒太多時間, 等一下子先...

阿死

合眾人之力, 一定成功