hktvro

原帖由 大雄 於 2007-6-21 13:45 發表
聽個2公婆同buyer講係寄賣
佢地得張Pin位I/O圖
行乜IC都唔知 . . .
仲話要買左先俾E-mail問個賣家
個E-mail...

我買了一個 , 控制晶片是KS0713

palm3tong

hi hktvro ,

I bought this one as well but can't make it work. I connected it to 89s51 (not 52) and burn the demo program and it didn't work. I only got the hex file of the demo program and can't make it work for 89s51. How about you? Did you try it with uP? or connected it to the parallel port?
Hope you can share some more info. in using it.
Thanks.

阿死

原帖由 dino_lo 於 2007-6-21 14:38 發表
只是應用廣,有人買,應是常用的種類.
led 背光,有少少心動,想買番個玩.

dino 買完 教我地玩

kkjason

我又等

綠袖子

我想問有無人整一套現成既系統比人買？

ktktkt

I bought two pieces of that LCD (keep for later use). The guy just e-mailed me the circuit (as posted in previous posts) and the demo .hex (no source), so basically the .hex was useless (but the controller information KS0713 and the pinouts are important!). The controller is KS0713, I found the datasheet and rewrote the driver in C, tested the LCD with uP DS89C450 which is just a high speed 8051. The LCD was OK.

palm3tong

Woo.....
Can you give me information of how to do it? Or, would you mind to write a short "How-to", so that we can follow. Thanks.

檸檬

我有5個16x2藍背光clcd有冇人有興趣呢?

大雄

原帖由 檸檬 於 2007-6-23 17:25 發表
我有5個16x2藍背光clcd有冇人有興趣呢?

人地係GLCD wor

kkjason

原帖由 ktktkt 於 2007-6-23 15:21 發表
I bought two pieces of that LCD (keep for later use). The guy just e-mailed me the circuit (as posted in previous posts) and the demo .hex (no source), so basically the .hex was useless (but the co ...

可否分享心得
1.)我唔明個LCD 個Pin 12,13(RD/WR) 因為其他LCD 係共用的
2.) Pin 15(RES) 又點攪呢?

THX