amoslee

原帖由 hangck 於 2009-5-23 00:24 發表

有影響!!!
如果你有安裝過360厚排就知道la

小弟有安裝過360厚排，
或者C Hing你可分享o下你的經驗嗎？

hangck

我裝360厚排時有高手話上e d厚排時一定上冷排中間先(如上前同後的話好容以有水阻)
同一道理1出2去冷排2出1去冷頭好容以d水走埋一邊同水阻超大

amoslee

原帖由 darrem 於 2009-5-23 00:43 發表

當水道分開兩個排時,水流就會慢了,
係同一個LOOP入面有兩個排,(串聯同並聯)水阻是一樣的,因為你同樣係有兩個排

而家串聯就好似1條繁忙的公道上，交通很慢，我而家起多1條天橋去梳導交通。你可以話：起點同終點都只能行1輛車，所以就算我起10條天橋都是無用的。
但如此說，2程、3程甚至4程行車都不會比單程行車快？

amoslee

原帖由 hangck 於 2009-5-23 00:45 發表
我裝360厚排時有高手話上e d厚排時一定上冷排中間先(如上前同後的話好容以有水阻)
同一道理1出2去冷排2出1去冷頭好容以d水走埋一邊同水阻超大

sorry, 唔明....

(會唔會係你指因個排的位置而好難令個排入面D空氣走到出黎而從而影響咗個水阻呢？
又，有沒有多1點實則的數據呢？
Thank you!)

[ 本帖最後由 amoslee 於 2009-5-23 01:06 編輯 ]

hamsterspeed

you have to consider the flow rate on each rad because when spliting the loop into 2 the flow rate will be halved on each rad and it is important that you have a high initial flow rate so even you split it into two you still maintain an optimal flow rate.

As a reference from martinsliquidlab you should try to maintain flow rate at least 0.9gpm at all time anything below that will affect your temp significantly

amoslee

原帖由 hamsterspeed 於 2009-5-23 10:26 發表
you have to consider the flow rate on each rad because when spliting the loop into 2 the flow rate will be halved on each rad and it is important that you have a high initial flow rate so even you spl ...

thank you c hing!
that is a very helpful information!
I will grab more info from the site you  mentioned, and hopefully make a report on that!
:-)

[ 本帖最後由 amoslee 於 2009-5-23 12:35 編輯 ]

hamsterspeed

原帖由 amoslee 於 2009-5-23 12:32 發表

thank you c hing!
that is a very helpful information!
I will grab more info from the site you  mentioned, and hopefully make a report on that!
:-)

u might not be able to find that site anymore martin closed his site last year but I do have a softcopy of his website thats including his flowrate estimator... if you need it add me in msn I can send it to you.

FYI, skinnee from xs are doing similar test like martin very useful info in his site go google search skinneelabs

[ 本帖最後由 hamsterspeed 於 2009-5-23 13:39 編輯 ]

anonymoushk

......
i missed something ....

if you run two 360 in parallel , the distance of one loop will be shorter .....  < can run more loop at the same time

will the performance increase?

amoslee

原帖由 hamsterspeed 於 2009-5-23 13:31 發表


u might not be able to find that site anymore martin closed his site last year but I do have a softcopy of his website thats including his flowrate estimator... if you need it add me in msn I can se ...

c hing, I really appreciate your kindness and helpfulness!
Thank you very much!
However, it is pity that I don't have msn.

Meanwhile, I have made a little progress today, I tired up 2 rad
together and hope I can make a brief report later.