本帖最後由 pc1668 於 2016-4-27 17:03 編輯
有出 4 bay?
alanhippo 發表於 2016-4-20 11:39


I've already recommended this icydock 4-bay das (http://www.icydock.com.tw/goods_cat.php?id=165) at 5# (http://www.hkepc.com/forum/redir ... 52&pid=34732830)

And your reply at 8# was "有冇D再好d ?"

A week later, someone recommended the same das, then you were asking "有出 4 bay ?" ... quite interesting

TOP

本帖最後由 harryytm 於 2016-4-27 17:15 編輯
回覆  diy-apprentice


HornetTek Enterprise II 4bay docking
睇佢網上說明只支援最多 4 x 3T ...
Kin_2012 發表於 2016-4-27 16:42

HornetTek Enterprise 4x II我用緊,拔USB或閒置唔識得停轉啲HDD,要自已用smartctl去控制。

其他效能方面幾穩定,就係HDD要上落個架先裝到落去嗰度唔好。

TOP

回覆 42# harryytm

唔識停轉就煩少少, 但人手都勉強可以
但唔支援 4T 就無計, 另外行 USB 行 raid 1 都怕佢慢

TOP

回覆 42# harryytm

Something about external usb 3.0 hdd ...

I've 3 ext usb hdds :
- Transcend storejet 25H3 2TB (WD hdd)
- Transcend storejet 25A3 2TB (Seagate hdd)
- A-DATA HV620 2TB (Toshiba hdd)

When connecting to a qnap nas, the two transcend hdds are able to go to sleep when there was no activity in 5-10 mins.  However, the A-DATA will keep spinning at 24x7!  Is there anything we can do to enable sleep mode?

TOP

我想有Unitek 4bay嘅師兄,幫我試下用唔用到smartctl個-n standby用嘅偵測待命狀態個功能?

TOP

回覆  harryytm

Something about external usb 3.0 hdd ...

I've 3 ext usb hdds :
- Transcend storej ...
pc1668 發表於 2016-4-27 17:22

not every SATA to USB 3.0 bridge chip support all S.M.A.R.T. command, the only choice you have is to use another SATA to USB 3.0 bridge chip.

TOP

本帖最後由 pc1668 於 2016-4-27 17:38 編輯
not every SATA to USB 3.0 bridge chip support all S.M.A.R.T. command, the only choice you have is to use another SATA to USB 3.0 bridge chip.
harryytm 發表於 2016-4-27 17:31


Then most likely the A-DATA sata to usb 3.0 bridge chip does not support sleeping mode.  

One of the solution could be removing the Toshiba (it will void the warranty) and test it in a, let say UNITEK Y-1039B sata to usb 3.0 converter.

TOP

本帖最後由 pc1668 於 2016-4-27 18:03 編輯

回覆 42# harryytm

回覆  harryytm
唔識停轉就煩少少, 但人手都勉強可以
但唔支援 4T 就無計, 另外行 USB 行 raid 1 都怕佢慢
Kin_2012 發表於 2016-4-27 17:16


Dunno about raid 1.  But I've a UNITEK 2-Bay (I don't have any 4-bay) with 2TB x 2 (HGST and Toshiba) running raid 0 and the speed was okay.

Regarding sleep mode (spin down), as the blue light never goes off, I would assume it just won't sleep !

3356N_14_crop.jpg

RAID0 2016_04_04_crop2.jpg

TOP

回覆 48# pc1668

外置硬碟行 raid 0 為咩?  
想試失去的感覺?

TOP

本帖最後由 pc1668 於 2016-4-27 21:08 編輯

回覆 49# Kin_2012

外置硬碟行 raid 0 為咩?  
- I need a large capacity hdd to store my video files
- I've two extra 2TB hdds but 2TB itself is way too small in capacity
- Creating a virtual 4TB (via raid 0) is more handy for the said purpose

想試失去的感覺?
- Wanted to see how stable the UNITEK raid 0 is ... seems very stable
- In addition, I've standalone backup of all the important files (including video files)

TOP