Hope this helps:
Windows 10 都有 Bragi App
"
1.Open the Bragi App and start the setup guide to connect a new device.
2.Go to the bluetooth settings of your smartphone and select "The Dash Pro ##" as instructed in the Bragi App. (Do not select The Dash Pro ##X at this point).
3.If The Dash Pro is not visible do a Long Hold (5sec) on The Right Dash Pro and The Dash Pro will become visible.
4.After the connection has been established return to the Bragi App, which will automatically connect to the sensors and confirm once the setup was successfully completed."
https://support.e-use.com/hc/en-us/articles/115003251945-The-Dash-Pro-Bluetooth-Pairing-Process?mobile_site=true
via HKEPC Reader for Android |