就算dvbviewer用正版都係epg唔掂

lastphoenix

無睇開的台，個節目表唔update
要關左個軟件再開，轉下台先得

你地係咪？

用緊5.3.2.0

以前用x版都係用這方法update epg

C_Law

係！
重要每次過了午夜，81~85 台的 EPG 會消失，一定要關閉再重開 DVBViewer 再睇一睇 81~85 其中一個台先至會令 81~85 的 EPG 回復正常。

http://www.hkepc.com/forum/redirect.php?goto=findpost&ptid=2356569&pid=35978257

kofz

係！
重要每次過了午夜，81~85 台的 EPG 會消失，一定要關閉再重開 DVBViewer 再睇一睇 81~85  ...
C_Law 發表於 2017-4-29 13:47

哩個bug一直都存在

MokonaModoki

好似係因為香港電視台個event ID會重用，而佢無特別handle到～
http://www.dvbviewer.tv/forum/to ... -bug-hong-kong-tvb/
「There is one thing you can try: Untick Options -> EPG -> Persistent EPG Data in DVBViewer Pro, and delete the file epg.dat in the configuration folder in order to get rid of old data. This will prevent DVBViewer from storing the EPG. It will only be available for a channel after having received the channel / frequency during a DVBViewer session. However, the issue may still occur if the EPG is updated while DVBViewer is running.」

kofz

好似係因為香港電視台個event ID會重用，而佢無特別handle到～

「There is one thing you can try: Untick ...
MokonaModoki 發表於 2017-4-29 17:32

    我咪咁做，每星期一次手動更新epg

lastphoenix

我咪咁做，每星期一次手動更新epg
kofz 發表於 2017-4-29 21:19

每星期要del epg.dat?

kofz

每星期要del epg.dat?
lastphoenix 發表於 2017-4-29 21:32

係，我停左自動更新epg

全手動

lastphoenix

係，我停左自動更新epg

全手動
kofz 發表於 2017-4-29 21:46

停完唔del epg.dat
係咪開關dvbviewer都唔會update?

kofz

停完唔del epg.dat
係咪開關dvbviewer都唔會update?
lastphoenix 發表於 2017-4-29 23:30

都會更新

重點係要停自動更新

voigtlander

試緊最新版 V6.0.1.0，唔知有冇改善。

EPG

Change: Channel Editor/EPG: Previously the EPG settings in the channel editor specified which EPG types (DVB/MHW/External) are accepted and stored for a channel. Now all arriving EPG data is stored and the settings decide which EPG type is displayed for a channel, allowing to switch between them. Data from different sources for the same channel can coexist in the EPG data base without being mixed up or overwritten. If more than one EPG type is allowed and available for a channel, DVBViewer prefers external (imported) EPG data over MediaHighway data over DVB data.

Removed/Change: EPG Options: The three checkboxes “Receive standard / MediaHighway / Freesat EPG data” have been removed. EPG reception is now always enabled, particularly Freesat EPG reception if the orbital position of satellite channels is 28.2° East (previously switched off by default). Additionally the “MHW/Freesat” page (allowing to enter frequencies on which MediaHighway and high speed Freesat EPG is broadcasted) has been merged with the main EPG page.

Change/Fix: EPG Handling: General restructuring of EPG related code, including support for the import of external EPG data from Xepg for TS Stream channels. Some problems and inconsistencies have been fixed.

Fix: EPG Window: Parts of the EPG timeline were not scaled according to the Windows text size. On program controlled tab changes (not directly triggered by the user) the content of the filter drop-down list was not adjusted to the active tab.
Fix: EPG Import: The EPG import from the Recording Service after waking up from sleep mode / hibernate tended to fail due to network adapters not being ready at this early stage. It is now performed after a delay of 30 seconds (see here). Additionally the import is now performed in the background in order to prevent the UI from freezing for several seconds due to waiting if the server is unreachable.

http://www.dvbviewer.tv/forum/topic/59624-dvbviewer-600/