ubuntu wake on lan問題

DIY2018

有部舊機底板係EP45-UD3LR，用開win11,
wol s5 state係冇問題,一直可以用"ether-wake -i br0 xx:xx:......"開機
近來因為win11 24h2唔再support，諗住轉下ubuntu,裝完發覺用ether-wake一定要加broadcast(-b)
先可以踢醒部機，因為我用asus router所以remote只可以"ether-wake -i br0 xx:xx:......"
後來還原返win11就可以wake了
會唔會有個llan driver有bug?

jwong2k04

第一次見 Wake on Lan 同 OS 有關聯

arschmitohren

1. sudo nano /lib/systemd/system/wakeonlan.service

複製代碼

1. [Unit]
   
2. Description=Enable Wake On Lan
   
3. 
   
4. [Service]
   
5. Type=oneshot
   
6. ExecStart=/usr/sbin/ethtool -s <DEVICENAME> wol g
   
7. 
   
8. [Install]
   
9. WantedBy=basic.target

複製代碼

1. sudo systemctl enable wakeonlan.service

複製代碼

DIY2018

arschmitohren 發表於 2024-12-11 00:53

已經係wol g
問題係一定要 broadcast magic packet 先可以wake

via HKEPC Reader for Android

arschmitohren

要擺佢落service每次開機oneshot, 其他distro都係類似

1. sudo ethtool "<DEVICE NAME>" | grep "Wake-on"

複製代碼

睇下出乜result

DIY2018

要擺佢落service每次開機oneshot, 其他distro都係類似睇下出乜result
arschmitohren 發表於 2024-12-11 17:03

我的setting:

cat /etc/systemd/system/wol-enable.service

[Unit]
Description=Enable Wake-up on LAN

[Service]
Type=oneshot
ExecStart=/sbin/ethtool --change enp4s0 wol g

[Install]
WantedBy=basic.target


Settings for enp4s0:
        Supported ports: [ TP         MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Supported FEC modes: Not reported
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Advertised pause frame use: Symmetric Receive-only
        Advertised auto-negotiation: Yes
        Advertised FEC modes: Not reported
        Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                             100baseT/Half 100baseT/Full
                                             1000baseT/Full
        Link partner advertised pause frame use: Symmetric
        Link partner advertised auto-negotiation: Yes
        Link partner advertised FEC modes: Not reported
        Speed: 1000Mb/s
        Duplex: Full
        Auto-negotiation: on
        master-slave cfg: preferred slave
        master-slave status: slave
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: external
        MDI-X: Unknown
        Supports Wake-on: pumbg
        Wake-on: g
        Link detected: yes

arschmitohren

我的setting:

cat /etc/systemd/system/wol-enable.service


Description=Enable Wake-up on LAN

[Ser ...
DIY2018 發表於 2024-12-11 18:01

已經係 Wake-on: g, 咁可能ubuntu問題
因為windows正常wol到

有冇試過撞下呢d settings?
https://imgur.com/LA6tC3I

我自己係用default
冇開port, 平時vpn入router再wake著部機

arschmitohren

第一次見 Wake on Lan 同 OS 有關聯
jwong2k04 發表於 2024-12-10 19:00

有關聯呀, 唔淨止bios要set, os度都有wol settings
試過新nic driver做唔到wol要裝番舊版
24h2唔得都可能係nic driver累事