[其他] kingston g4 card reader 問題

belleville

1, 佢本身係未無燈?
2, 第一次插卡係未一定唔 work? 試左 3 張卡, 都係第一次認唔到, 要第二次先認到

anon893

回覆 1# belleville
1. No LED indicator
2. Should work the first time card is inserted
Plug in reader first (no card inside) so that computer will recognise device (and install driver) first
Eject (remove) device, then plug in with card inserted, card should be recognised

BTW mSD must be used with smaller slot
Card will not be recognised if plugged into SD slot with card adapter

belleville

己經係插左 reader 先插 pc, 大插大, 細插細 slot
唯有當我插得衰, 接觸不良, 新買攞返去, 都唔知點同佢講