OCZ SSD Toolbox不支持Intel RST 10.x driver, 那麼用新Intel P67/H67/Z68主板的怎麼辦?

FullHD8

OCZ SSD Toolbox不支持Intel RST 10.x driver, 那麼用新Intel P67/H67/Z68主板的怎麼辦? 都不能在Intel新主板安裝OCZ SSD?


New v1.33 Firmware
Please backup all data on the SSD as a precaution. This OCZ Toolbox does not work with Intel RST 10 series drivers

OCZ Toolbox version 2.36
------------------------
- Firmware update is allowed on Windows XP OS
- Firmware update is not allowed on Vertex 3 drives containing firmware version prior to 2.02
- Secure erase is not allowed on primary drive

Known Issues:
- Update Firmware feature prohibited for primary drives with 1500 & 2000 controller
- Secure Erase is not working on LSI driver SCSI drives
- Intel Driver 10.1.0.1008 prohibits SSD detection

OCZ Toolbox version 2.35
------------------------
- Allowed Update Firmware feature on primary (boot) drives with 1200 controller

OCZ Toolbox version 2.34 (not released)
------------------------
- Resolved LSI 1068 board SSD detection issue
- Resolved LSI 9211 board SSD detection issue

ar_K

之前我用Intel RST 的 update firmware的時候，都update唔到，要用返Microsoft原裝driver先得，Intel RST 個driver好似有兼容性問題，你係用RST在新的intel 320同vertex 3都會lag 或 認唔到 SSD就知。所以唔覺不支持RST係一回事。唯有等RST有新更新la。

我平時都係用RST，不過係更新firmware的時候會返MS Driver。

sunderstan

use compatibility mode to windows XP SP3/SP2 to execute the SSD toolbox program.

BigLazy1020Pro

use compatibility mode to windows XP SP3/SP2 to execute the SSD toolbox program.
sunderstan 發表於 2011-5-9 02:08 PM

扮 XP 進行優化, 對其他 OS 效能可能會有大影響

FullHD8

use compatibility mode to windows XP SP3/SP2 to execute the SSD toolbox program.
sunderstan 發表於 2011-5-9 14:08

XP compatibility mode可以行到?