Temperature control cooling fan

tnovicet

I am going to diy the temperature control cooling fan system based on the circuit below with some modification.

Posted on Everyday Practical Electronics, August 2008.

下載 (96.76 KB)

2009-8-7 12:36

Test the circuit on a breadboard first.

下載 (70.19 KB)

2009-8-7 15:26

Try to place all the components onto a graph paper.
To see connections are possible or not, minimize the jumper wires.
(Components Side)

下載 (45.21 KB)

2009-8-10 15:22

Copper tracks that need to be cut, breaking  the connections.
(Soldering Side)

下載 (26.42 KB)

2009-8-10 15:06

Cut out appropriate size of stripboard.

下載 (72.46 KB)

2009-8-10 15:06

Using the handheld drill to break the tracks connection.

下載 (49.46 KB)

2009-8-10 15:06

The PCB is now ready for soldering.

下載 (50.17 KB)

2009-8-7 11:47

下載 (46.37 KB)

2009-8-11 12:30

下載 (117.53 KB)

2009-8-11 12:30

下載 (93.55 KB)

2009-8-11 12:30

下載 (52.95 KB)

2009-8-7 11:47

More photos and details will be posted later.

[ 本帖最後由 tnovicet 於 2009-8-11 12:30 編輯 ]

nothingzd

有冇反轉既相睇下
似乎幾靚喎

tnovicet

Not yet completed, just placeing the components

sony_eng

CHing, very interesting PCB.  Where did you get it?

tnovicet

Partially DIY

[ 本帖最後由 tnovicet 於 2009-8-9 01:31 編輯 ]

KaricKKL

after u have complete show us a report ........

sony_eng

Even DIY the PCB board and drill all holes??

風之小文

do u have more photo???
wahere is the relay in photo??

tnovicet

Sorry, misleading you!
Partially DIY.

tnovicet

I am directly controlling the cooling fan, relay is not needed.
More photos and details will be posted later.

[ 本帖最後由 tnovicet 於 2009-8-9 01:30 編輯 ]