作者: Offer 時間: 2025-8-3 09:45 標題: Bambu Lab H2S
https://www.tomshardware.com/3d- ... CQe1gl8i9vZTYdMSl6Q
Bambu Lab H2S新3D打印機因Wiki頁面手冊失誤而被意外洩漏。
只是Bambu Lab官方暫時冇公開完整規格同上市詳情
係真係假請自行判斷
作者: Super169 時間: 2025-8-16 11:30
H2S 就未見, 但就出左 H2D Pro.
https://bambulab.com/en/h2d-pro
作者: dtom 時間: 2025-8-16 13:13
本帖最後由 dtom 於 2025-8-16 13:47 編輯
8月特價仲有幾日，諗緊要唔要買返部 P1S
如果只係單頭，咁係咪 P1S + AMS 2 抵玩啲呢
不過H2S應該起碼可以加 laser，但個價買 laser 家用既話真係難攪（住村屋都可能有得諗下）
| Feature | P1S ． | H2D ． | H2S ． | H2D Pro ． |
| Price | ¥2999 (AMS ¥3599) | (AMS2) ¥13999 | ??? | AMS2 ¥13999 AMS2+10w laser ¥17999 AMS2+40w laser ¥22999 |
| Build Volume | 256×256×256mm | 350×320×325mm | Unknown | 350×320×325mm |
| Nozzle | Single, SS | Dual, Hardened Steel | Single (leaked) | Dual, Tungsten Carbide |
| Max Nozzle Temp | 300°C | 350°C | Unknown | 350°C |
| Heated Bed Temp | 100°C | 120°C | Unknown | 120°C |
| Max Speed | 500mm/s | 1,000mm/s | High (leaked) | 1,000mm/s |
| Max Acceleration | 20,000mm/s² | 20,000mm/s² | High (leaked) | 20,000mm/s² (assume) |
| Chamber Heating | No/Passive | Yes, 65°C | Unknown | Yes, 65°C |
| Multi-material | AMS (single nozzle) | Dual nozzle + AMS 2 | Unknown | Dual nozzle + AMS 2 |
| Laser Engraving | No | Optional 10W/40W laser | Not known | Not indicated (likely) |
| Display | 2.7-inch 192 x 64 Screen | 5-inch 720*1280 Touchscreen | Unknown | 5-inch 720*1280 Touchscreen |
| Camera | Low Rate 1280 x 720 | Live View 1920*1080 Nozzle 1920*1080 Toolhead 1920*1080 | None | Live View 1920*1080 Nozzle 1920*1080 Toolhead 1920*1080 |
| Security | None | None | None | Enterprise-grade (WPA2-Ent, killswitch) |
| Market | Consumer | Prosumer/Maker | Budget Prosumer | Professional/Enterprise |
作者: Offer 時間: 2025-8-16 17:10
8月特價仲有幾日，諗緊要唔要買返部 P1S
如果只係單頭，咁係咪 P1S + AMS 2 抵玩啲呢
不過H2S應該起碼可以 ...
dtom 發表於 2025-8-16 13:13
P1S性价比高
作者: hambaba 時間: 2025-8-24 16:23
26號外國時間出
K2比人話準備時間過長 竹屎多
又可以觀望返H2S