作者: rebmup 時間: 2022-2-16 07:23 標題: Login problem
本帖最後由 rebmup 於 2022-2-16 07:29 編輯
Login Problem
我第一次入個pw係錯既, 佢會出
Invalid password, please try again.
但我第二次入啱既, 佢唔比我入, 但又唔出上面個句説話, 發生咩事呢 ?
Remark:神奇既係, 尼個password 間中入到去, 大約一頭半個月, 就入唔到 . . . .過得一頭半個月, 又入得返 . . .入唔到既話, 佢唔會出
Invalid password, please try again.
只係好似影片咁, 咩都無顯示!
作者: chancho 時間: 2022-2-16 08:24
some distro will limit the time and retry for error login, may be that's your case. in archlinux, it is controlled by /etc/security/faillock.conf
作者: rebmup 時間: 2022-2-16 09:10
Thank you ! But there is no error login, every time the login password is correct. I just typed the wrong password to show the message shown if the password is incorrect.
作者: chancho 時間: 2022-2-16 12:31
more info is better.
are you trying to login a remote server or just local desktop ?
use "faillock" to see the recent fail log.
作者: rebmup 時間: 2022-2-16 17:35
more info is better.
are you trying to login a remote server or just local desktop ?
use "faillock" ...
chancho 發表於 2022-2-16 12:31
Local desktop
via HKEPC Reader for Android
作者: rebmup 時間: 2022-2-16 17:36
more info is better.
are you trying to login a remote server or just local desktop ?
use "faillock" ...
chancho 發表於 2022-2-16 12:31
我login 唔到入去, 咁請問點睇faillock ?
via HKEPC Reader for Android
作者: javacomhk 時間: 2022-2-16 17:46
試得多咪 lock 咗就唔會出 invalid password.
作者: KinChungE 時間: 2022-2-16 17:53
你有冇試過ctrl + f1出翻text mode, 再login睇下佢出乜error?
再唔係用single user mode開機, 然後再睇log
作者: rebmup 時間: 2022-2-17 07:15
試得多咪 lock 咗就唔會出 invalid password.
javacomhk 發表於 2022-2-16 17:46
就係唔係, 個pw 從來都係同一過, 無論我login到定login唔到入去! 一直都無出invalid pw. . . .我只係因為試比大家睇, 先試個錯既pw.
via HKEPC Reader for Android
作者: rebmup 時間: 2022-2-17 07:22
本帖最後由 rebmup 於 2022-2-17 07:23 編輯
你有冇試過ctrl + f1出翻text mode, 再login睇下佢出乜error?
再唔係用single user mode開機, 然後再睇log ...
KinChungE 發表於 2022-2-16 17:53
我試左ctrl+F1, 但入唔到去text mode, 應該幾時按?
點樣可以用single mode 開機 ?
via HKEPC Reader for Android
作者: chancho 時間: 2022-2-17 08:10
you may be right, F1 is the default terminal which is using to start the x-server.
F7 is the default terminal which is the actual x-server running.
i will try CTL+ALt+F3 for terminal.
there is sometimes we think we are entering the right password, however, i do have experience that my keyboard double my key stroke. or my caps lock is on, or my keyboard is switched to chinese. may be that's one of your case.
作者: javacomhk 時間: 2022-2-17 08:20
就係唔係, 個pw 從來都係同一過, 無論我login到定login唔到入去! 一直都無出invalid pw. . . .我只係因 ...
rebmup 發表於 2022-2-17 07:15
咁你試下打錯埋個user name 睇下會唔會出 invalid password?
作者: KinChungE 時間: 2022-2-17 09:08
我試左ctrl+F1, 但入唔到去text mode, 應該幾時按?
點樣可以用single mode 開機 ?
via HKEPC Reader f ...
rebmup 發表於 2022-2-17 07:22
我講漏左, 應該ctrl + alt + f1
其實有F1至F7, 你試下邊個出text mode, 邊個出gui
至於single user mode, 你要響grub開機前按e入edit mode, 然後搵出boot linux image果句最尾加上"single"字眼再boot