作者: Exai 時間: 2009-6-29 14:04 標題: 690上水
一晚起貨
https://h2.hkepc.com/forum/attachment.php?aid=885897&k=9950d2678ba77de8cf15a494c2d6bc43&t=1782707840&sid=2sWIW0o5Ls

https://h2.hkepc.com/forum/attachment.php?aid=885899&k=5f36eb7c5beff210ed9a20c65895cf53&t=1782707840&sid=2sWIW0o5Ls

https://h2.hkepc.com/forum/attachment.php?aid=885901&k=a6ae373a0a5de8e4aa86938b0c5f3736&t=1782707840&sid=2sWIW0o5Ls

https://h2.hkepc.com/forum/attachment.php?aid=885903&k=8442d7ba4e90e3bbe88032b7d37716fa&t=1782707840&sid=2sWIW0o5Ls

https://h2.hkepc.com/forum/attachment.php?aid=885905&k=cc976d87997066e0f997ad75c0fce528&t=1782707840&sid=2sWIW0o5Ls

https://h2.hkepc.com/forum/attachment.php?aid=885907&k=b7d8f49e5e4a65d571ea157df1b1c1fd&t=1782707840&sid=2sWIW0o5Ls

https://h2.hkepc.com/forum/attachment.php?aid=885909&k=607ce55b2f5c318e7c2f568bd58a2748&t=1782707840&sid=2sWIW0o5Ls

https://h2.hkepc.com/forum/attachment.php?aid=885911&k=f425ff1f6c2ab12641f1a5c4f121038c&t=1782707840&sid=2sWIW0o5Ls

作者: yuen2 時間: 2009-6-29 14:08
你d水唔係綠色既咩
作者: darrem 時間: 2009-6-29 14:25
提示: 作者被禁止或刪除 內容自動屏蔽
作者: hamsterspeed 時間: 2009-6-29 14:37
佢條loop 起泡似d wor
作者: Exai 時間: 2009-6-29 14:46
d管好耐之前嫁啦
D水係水箱水,,同埋2個月之前溝GE
作者: Exai 時間: 2009-6-29 14:48
今次主要5係為樣
只係為溫度
作者: hamsterspeed 時間: 2009-6-29 14:58
條loop 有泡會影響效能wor....
作者: yiu1 時間: 2009-6-29 15:07
怕唔怕個PUMP熱住火牛?
作者: Exai 時間: 2009-6-29 15:11
過一兩日應該會冇
唔怕熱住
因為有野格住
作者: hamsterspeed 時間: 2009-6-29 15:17
我經驗話我知 如果你條loop起泡起成咁 就算過多幾日都會係一樣...
我開頭第一次玩就係好似你咁成條loop起泡起到變白...
正常排泡係應該10-15分鐘完成
作者: CWPP 時間: 2009-6-29 15:21
為溫度?
forgot to put two extract fans on the rear radiator?
作者: CWPP 時間: 2009-6-29 15:31
alum (anodised) + copper in same loop, I assume you have a good strong protective coolant then, however strong coolant has conflict with water blocks having acrylic top especially when in operation/tension.... screw threads is made on the acrylic top side.
I still like your RAM block very much although it runs smaller tubes. It is such a representable classic
[ 本帖最後由 CWPP 於 2009-6-30 02:28 編輯 ]
作者: amoslee 時間: 2009-6-29 15:36
原帖由 hamsterspeed 於 2009-6-29 15:17 發表
我經驗話我知 如果你條loop起泡起成咁 就算過多幾日都會係一樣...
我開頭第一次玩就係好似你咁成條loop起泡起到變白...
正常排泡係應該10-15分鐘完成
哈! 喱個問题咪早幾日討論過囉....?
作者: Exai 時間: 2009-6-29 15:52
今次上水主要都係令4890降下溫
作者: hamsterspeed 時間: 2009-6-29 15:56
係... 不過唔緊要啦 樓主應該新黎 大家提點下佢仲好 唔係自己整錯野都唔知
係epc出post 好玩之處 就係會成日比人critic
我地又係小玩意中尋找大學問攞
[ 本帖最後由 hamsterspeed 於 2009-6-29 16:00 編輯 ]
作者: hamsterspeed 時間: 2009-6-29 16:06
guys case closed
作者: CWPP 時間: 2009-6-29 16:06
原帖由 hamsterspeed 於 2009-6-29 15:56 發表
係... 不過唔緊要啦 樓主應該新黎 大家提點下佢仲好 唔係自己整錯野都唔知![]()
係epc出post 好玩之處 就係會成日比人critic
我地咪又係小玩意中尋找大學問攞![]()
![]()
![]()
Hey, HampsterS hing, it is an interesting case which the reservoir is in the middle of loop, but not before the pump as in usual setup. If those are really bubbles, it reflects either the pump is really powerful or the reservoir can generate much bubbles.
Most importantly, I cannot be sure if they are true colour of coolant or bubbles. The system/pump may be not even running in the picture, fans are not running......
[ 本帖最後由 CWPP 於 2009-6-29 16:12 編輯 ]
作者: hamsterspeed 時間: 2009-6-29 16:17
I pretty sure the coolant should be in green check the res on 2nd pic. I think the problem comes from the res.
[ 本帖最後由 hamsterspeed 於 2009-6-29 16:17 編輯 ]
作者: CWPP 時間: 2009-6-29 16:21
原帖由 hamsterspeed 於 2009-6-29 16:17 發表
I pretty sure the coolant should be in green check the res on 2nd pic. I think the problem comes from the res.
Yes, but I think the water coolant in the loop is idle, system is not running, coolant is in cream colour, so I think they are totally 2 different stages/setup photos rather. The photo particularly shows the reservoir with green water is out of place, maybe it is a seperate poster just to introduce the model of reservoir, the photo name DSC046.jpg is another hint comparing with others. This is becoming an photohunt exercise, I better stop.....

[ 本帖最後由 CWPP 於 2009-6-29 16:36 編輯 ]
作者: amoslee 時間: 2009-6-29 16:37
原帖由 CWPP 於 2009-6-29 16:06 發表
Hey, HampsterS hing, it is an interesting case which the reservoir is in the middle of loop, but not before the pump as in usual setup. If those are really bubbles, it reflects either the pump is re ...
樓主可否提供水道以供参考? thx!
諝問是否有用並聯的水道?
作者: hamsterspeed 時間: 2009-6-29 16:38
ummm one of the pic there (4627) shows the white tubing and the res... so i assume they are the same system. but ya... they maybe taken at different time who knows
作者: CWPP 時間: 2009-6-29 16:55
原帖由 hamsterspeed 於 2009-6-29 16:38 發表
ummm one of the pic there (4627) shows the white tubing and the res... so i assume they are the same system. but ya... they maybe taken at different time who knows![]()
yes, coolant colour is green probably you are right, 4627, 4628, do look little green behind the cream colour, while 4626 looks like the waterloop is idle and shows a steady cream colour instead....arh...whatever.....
Amongall, it is so unbelivable for such a vibrant coolant colour change, especially if the system is not running, maybe the tube is really old which exaggerates the differences.
作者: Exai 時間: 2009-6-29 16:57 標題: 回覆 20# 的帖子
240排>水箱>PUMP>RAM(並聯)>GPU(並聯)>240排>PUMP>北橋>CPU>240排>水箱>----
因為RAM同GPU水阻大先果兩個位走並聯
作者: KaricKKL 時間: 2009-6-29 19:19
咁多泡?
作者: MeiMei 時間: 2009-6-29 20:39
水变哂奶昔
作者: amoslee 時間: 2009-6-29 21:09
原帖由 Exai 於 2009-6-29 16:57 發表
240排>水箱>PUMP>RAM(並聯)>GPU(並聯)>240排>PUMP>北橋>CPU>240排>水箱>----
因為RAM同GPU水阻大先果兩個位走並聯
如此, 點解唔行2條loop呢?
ps, 我仲未睇到你條loop點走....
作者: Exai 時間: 2009-6-30 00:09 標題: 回覆 26# 的帖子
因為物資有限
作者: daniel39 時間: 2009-7-5 20:32
玩水冷好大程度係視覺享受,但樓主D管同D咀真係.................

